Enhanced Thermostatic Controls (ETC)

The ETC range is based around a simple room controller that monitors room temperature and operates the louvres automatically. Push buttons are also included to allow manual opening or closing of ventilation louvres as well as the normal automatic operation. LEDs show the operating mode of the switch and any active manual commands. The switch is pre-programmed to return to automatic operation after a pre-set time (configurable; 30mins - 3hrs).

Two systems are available;
- Two position operation, fully open or closed; 230V (ETC1) or 24V (ETC2).
- A modulating 24V (ETC3) unit for variable control of ventilation rate.

- Download Product Brochure >

- Control Systems >

Back >